Engineered Oak Flooring

The Woodland Collection engineered oak flooring is of the highest quality and comprises of several layers of Birch Ply bonded together with a thick oak wear layer on top that is suitable for re-sanding when the surface needs to be refreshed. Due to the extreme pressures used during bonding, engineered oak flooring is very stable and can be installed in a room where there is increased humidity or where under-floor heating is present.

With exceptional load-bearing capability, engineered oak flooring is ideal for direct fixing to floor joists or as a floating floor over a wide variety of underlay - you can even glue it directly to a sub-floor. There are numerous advantages to engineered oak flooring and it shares the same hard-wearing surface as solid oak flooring, so it’s almost impossible to tell them apart visually.

Ask about our engineered oak flooring today and we’ll tell you why ours is the best available. Exclusive to Morefloor, our engineered oak flooring is from carefully selected European sources, doesn’t use a softwood base and the oak layer is attached using a sophisticated cold bonding process for the highest quality – and once it’s laid you can’t tell the difference between a solid oak and an engineered oak floor!

Brushed White Country Oak Missouri Mistyc Black
Brushed White Country Oak Missouri Mistyc Black
Mountain Grey Rochester Engineered Oak Flooring from the Woodland Collection
Mountain Grey Natural

Sizes and Prices

Rustic Finish (see below for definition)

Length: 600 - 2600mm
Thickness: (mm)
Width: (mm)
Price per M² excludes VAT
Birch Plywood + Oak Wear Layer = Total Thickness 120 140 160 180 225 280
12mm + 4mm = 16mm Total Thickness £36.85 £37.40 £37.75 £38.00 £40.60  
15mm + 4mm = 19mm Total Thickness £38.70 £39.25 £39.60 £39.85 £42.55  
15mm + 6mm = 21mm Total Thickness £40.35 £41.10 £41.60 £42.80 £44.00 £72.00

All prices above exclude VAT
Pre oiled with natural oil £6.50 + VAT/m2 extra.
Supplied in board lengths between 600 - 2600mm.

Character Finish (see below for definition)

Length: 600 - 2600mm
Thickness: (mm)
Width: (mm)
Price per M² excludes VAT
Birch Plywood + Oak Wear Layer = Total Thickness 120 140 160 180 225 280
12mm + 4mm = 16mm Total Thickness £41.85 £42.40 £42.75 £43.00 £45.60  
15mm + 4mm = 19mm Total Thickness £43.70 £44.25 £44.60 £44.85 £47.55  
15mm + 6mm = 21mm Total Thickness £45.35 £46.10 £46.60 £47.80 £49.00 £77.00

All prices above exclude VAT
Pre oiled with natural oil £6.50 + VAT/m2 extra.
Supplied in board lengths between 600 - 2600mm.

Prime Finish (see below for definition)

Length: 600 - 2600mm
Thickness: (mm)
Width: (mm)
Price per M² excludes VAT
Birch Plywood + Oak Wear Layer = Total Thickness 120 140 160 180 225 280
12mm + 4mm = 16mm Total Thickness £45.85 £46.40 £46.75 £47.00 £49.60  
15mm + 4mm = 19mm Total Thickness £47.70 £48.25 £48.60 £48.85 £51.55  
15mm + 6mm = 21mm Total Thickness £49.35 £50.10 £50.60 £51.80 £53.00 £81.00

All prices above exclude VAT
Pre oiled with natural oil £6.50 + VAT/m2 extra.
Supplied in board lengths between 600 - 2600mm.

FinishesSolid Oak Price

Rustic - knots up to 60mm in diameter. Some colour variation, hairline splits, rustic appearance with some lighter sapwood.

Character - knots up to 30mm in diameter. Limited sap on face.

Prime - small occasional pin knots. Variant grain patterns, uniform looking in tone. May include some quarter sawn. Minimal sap on face.

For more information on sizes and pricing, or if you’d like to speak to one of our oak wood flooring experts, call now on
01962 776 776.

MoreFloor Engineered Oak Flooring